Download Print this page

TECHWOOD TMJ-4511 Instruction Manual page 7

Electric slow cooker

Advertisement

Before first use, remove the device and all accessories and being careful with
sharp accessories.
• Clean the apparatus according to the instructions in "Cleaning" paragraph.
• Place the machine on a suitable flat, stable surface.
- Unpack the unit and ensure that each piece is in good condition.
- Read all instructions in this manual, in accordance with the operating instructions
and safety.
- Keep these instructions and advise potential users.
- Before first use, clean the inside of the removable container and cover with a soft
sponge and detergent. Rinse thoroughly with fresh water and dry it.
- Do not use aggressive cleaning agents or abrasive sponges.
CAUTION :
Clean only with a damp sponge after complete cooling of the unit.
The cooking is done only in the removable container (3).
Never fill with food or water the heating tank cooker (1).
- Do not use the appliance without the removable container (3)
- Do not use if the ceramic pot is empty.
- The maximum capacity of the removable container (3) is 4.00 L.
- The slow cooker (1) should only be used with removable container provided.
- Do not move the device during operation and after use to avoid burning.
- Always handle the slow cooker (1), the removable container (3) or lid by the
handles.
- Use insulated gloves if necessary.
- Do not use the appliance outdoors.
- Unplug the appliance does not operate normally, whether moving or when
servicing.
- The elements of the device are not compatible with conventional oven or
microwave.
- This device has been designed for domestic use only.
Any commercial use, inappropriate use or failure to comply with instructions, not
commitment or responsibility or the manufacturer's warranty.
 
● Unroll the power cord completely.
● Check that the tension in force in the country where you are corresponds to
that indicated on the apparatus.
● Connect the apparatus in a correct socket-outlet, (and connected to the
ground if the unit is Class I), to avoid any danger.
● Disconnect the power source cable before any operation of cleaning of
maintenance and accessories assembly.
Never immerse the heating base in water or any liquid.
USE
7

Advertisement

loading