Warnings And Indicators; Trip Computer; Instrument Panel Illumination; Display Settings - Hyundai PALISADE Quick Reference Manual

FEATURES AND CONTROLS

WARNINGS AND INDICATORS

Seat belt
Airbag warning light
warning light
ABS warning light
Malfunction
Electric Power Steering
Indicator
(EPS) warning light
Lamp (MIL)
Engine coolant Engine oil pressure
temperature warning light
warning light
Low Tire Pressure Warning Light/
Electronic Stability
Control (ESC) indicator
TPMS system malfunction light
AWD warning light Immobilizer indicator
Highway Driving
Light ON indicator
Assist Feature
High beam indicator Cruise ON indicator
Smart high beam
AWD LOCK indicator
indicator
Downhill Brake Control Forward Collision
(DBC) indicator
Avoidance Assist (FCA)
SPORT Mode indicator
Light

TRIP COMPUTER

FUEL
ACCUMULATED
ECONOMY
INFO
•Average Fuel
•Tripmeter
Economy
•Fuel Economy
•Instant Fuel
•Timer
Economy
11
Parking brake & Brake
fluid warning light
Electronic Brake force Distribution (EBD)
System warning light
Charging system
warning light
Low fuel level
warning light
Electronic Stability Control
(ESC) OFF indicator
Turn signal indicator
Idle Stop and Go (ISG)
Cruise SET indicator
Electric Parking Brake
(EPB) warning light
AUTO HOLD indicator
Light (if equipped)
Select "Trip Computer"
mode by pressing the
MODE button .
To change the trip mode
as follows, press the MOVE
button .
DRIVE INFO
Digital
Smart
•Tripmeter
Shift
speedometer
•Fuel Economy
•Timer
HYUNDAI

INSTRUMENT PANEL ILLUMINATION

DISPLAY SETTINGS

1. On the All Menus screen, touch Setup > General
2. The general settings screen will appear
3. Touch "screen saver"
4. Select Analog or Digital
SERVICE INTERVAL REMINDER SYSTEM
This system is designed to notify you of
your next vehicle maintenance interval
To Activate:
Press the SETUP button on the control
panel and select VEHICLE SETTINGS on
the screen.
Select the following:
Cluster > Service Interval > Enable Service
Interval > Enter Interval Distance/Time
PALISADE
Press the control button left (-) or right (+)
to adjust the brightness.
The center display can be
changed from analog to digital.
To change the settings follow the
steps below:
12