C) Setting Image Resolution In Pir Mode; D) Setting Photo Burst In Pir Mode - Conrad 596113 Operating Instructions Manual

c) Setting image resolution in PIR mode

• Switch the TEST OFF CAM PSET switch to CAM position..The.display.shows."CAM".
• Push the M key once within 30 seconds to switch to the setting mode for program selection.
• PIR.flashes.on.the.LC.display..Push.the.OK.key.to.confirm."PIR".
• Push the / .keys.until."CAM".flashes..Push.the.OK.key.once.to.confirm.the.camera.mode..
• The.star.symbol.
OK key to set the image resolution.
• Push the / .keys.to.select.an.image.resolution.of.8.MP.(3.stars),.5.MP.(2.stars).or.
3.MP.(1.star).
• Push the OK.key.to.confirm.the.selection.
• Push the M key to leave the menu.

d) Setting photo burst in PIR mode

• Photo.bursts.of.1.-.9.images.can.be.set.in.PIR.mode..This.means.the.camera.can.shoot.up.to.
9 images each time the shutter is released. Switch the TEST OFF CAM PSET switch to CAM
position..The.display.shows."CAM".
• Push the M key once within 30 seconds to switch to the setting mode for program selection.
• "PIR".flashes.on.the.LC.display..Push.the.OK.key.to.confirm."PIR".
• Push the / .keys.until."CAM".flashes..Push.the.OK.key.once.to.confirm.the.camera.mode..
• Push the .key.to.toggle.to.the.photo.burst.setting..The.current.setting.for.the.number.of.images.
flashes.on.the.LC.display.(e.g..3P)..Push.the.OK key.
• Push the /
to.confirm.the.selection.
• Push the M key to leave the menu.
.for.setting.the.image.resolution.flashes.on.the.LC.display..Push.the.
keys to select the number of images per photo burst from 1 to 9. Push the OK key
51