Table of Contents
Advertisement
7 Installation
7.1 Unpacking and packaging
When receiving the device in a crate or unpacked, make sure the device, the accessories and the packaging is not
damaged. If you discover any damage or missing parts make a note on the packing-list / delivery note of the carrier.
Inform h/p/cosmos and your dealer immediately in writing about any damage or missing parts.
The manufacturer does not assume liability for any damage, complaints or missing parts which are
not reported immediately upon delivery on the packing list/delivery note.
Before unpacking the machine and accessories, read the instructions on the crate. Pay special attention to small parts,
so that you do not dispose them or any instructions with the packaging. Within Germany, most devices are delivered
and assembled by h/p/cosmos directly or by an authorised forwarder. If delivered by h/p/cosmos, the packaging will be
removed and recycled.
If the device is delivered by a carrier, you can recycle the packaging yourself or send it back to the manufacturer
(transportation to be paid by the customer).
7.2 Transport
Some of the components are heavy in weight!
Please notice that the installation must be done by h/p/cosmos authorized technicians.
7.3 Storage
Store the devices at a temperature of – 20° ... + 50° C.
7.4 Environmental requirements / room configuration
The device should be protected from high humidity.
Temperature:
Relative humidity:
Air pressure:
Maximum operating altitude:
© 2016 h/p/cosmos sports & medical gmbh
+ 10° ... + 40°C
30 ... 70 % (non condensing!)
700 ... 1060 mbar
approx. 10,000 feet (3000 m), without pressurization
file: \\quasarf\erp$\article\cos14310pw-v1_1_hpc-en\20160706_cos14310pw-v1.1_hpc-en_instruction_for_use_h-p-cosmos_parawalk.doc
author: fh
email@h-p-cosmos.com
created 06.07.2016
installation
printed 06.07.2016
page: 15 of 30
Advertisement
Table of Contents
