Resetting Your Phone - Samsung SCH-r200 User Manual

All digital tri-mode phone
Hide thumbs Also See for SCH-r200:
Table of Contents

Advertisement

Note: Emergency number911 is hard-coded into your phone. You can dial this number any time, even when
the phone is locked or restricted. If you call 911 an audible tone is heard and an Emergency prompt
appears in the display for the duration of the call.
Important!: Because of various transmission methods, network parameters, and user settings necessary
to complete a call from your wireless phone, a connection cannot always be guaranteed.
Therefore, emergency calling may not be available on all wireless networks at all times.
Important!: DO NOT depend on this phone as a primary method of calling 911 or for any other essential or
emergency communications.
Remember to always turn your phone on and check for adequate signal strength
before placing a call.
Store Emergency Numbers
In standby mode, press the Menu (left) soft key (
1.
(for Settings),
prompted to enter the lock code.
Tip: The default lock code is the last four digits of your telephone number.
Enter the lock code, then press
2.
Press
3.
entries.
Enter the new emergency number (up to 32 digits in length).
4.
Press the OK (left) soft key (
5.
Call Emergency Numbers in Lock Mode
In standby mode, enter an emergency number using the keypad.
1.
Press
2.

Resetting Your Phone

Reset Phone returns all settings to their factory default values.
In standby mode, press the Menu (left) soft key (
1.
(for Settings),
prompted to enter the lock code.
Note: The default lock code is the last four digits of your telephone number.
(for Phone Settings), and
,
, or
to select from the three emergency number
to place the call.
(for Phone Settings), and
), then press
for Security. You're
for Emergency #.
) to save the number that you entered.
), then press
for Security. You're
Changing Your Settings
Phone Settings
115

Advertisement

Table of Contents
loading

Table of Contents