Belkin F4U093 Quick Start Manual

Setting up the Belkin USB-C™ 3.1 Express
Dock HD, F4U093
The Belkin USB-C™ 3.1 Express Dock HD, F4U093 is the all-in-one docking solution that connects
all external devices and powers your computer up to 60 W with just one cable. This article will
guide you on how to set up the Belkin F4U093.
NOTE: Before connecting the Belkin F4U093, please make sure your computer or laptop has the
latest updates. Visit the device manufacturer website to make sure you have the latest updates.
Step 1:
Attach the applicable AC power cord for your country/region into the included power supply
unit.
Step 2:
Plug the power supply into the wall then connect the power supply into the Belkin F4U093.
IMPORTANT: Before connecting the dock to your device, attach all of your preferred devices to
the ethernet, audio, USB-A, HDMI, and USB-C ports. You may use the one rear USB-C port for
devices, but the remaining front USB-C port must be left open to connect the dock to your
device.
Step 3:
Once all devices are connected, plug one end of the included USB-C cable into the open USB-C
port on the front of the Belkin F4U093.
Step 4:
Plug the other end of the USB-C cable into your device.
Step 5:
Turn ON your device.
2. What do the different colors on the light of the dock mean?