Samsung SCH-n330 Series User Manual page 46

Using Digit Dial
1. In idle mode, press and hold the
Dialing command menu appears on the display, and the
phone prompts, "Say a command" followed by a single
beep.
2. Say "Digit Dial."
The command Digit Dial appears in the display and the
phone prompts, "Number please" followed by a beep.
3. Say the number naturally and clearly.
•
If the phone asks "Did you say" followed by the correct number,
say "Yes." The phone dials the number.
•
If the phone asks "Did you say" followed by any incorrect
numbers, say "No."
•
If there are other choices, the phone prompts you with them
next.
4. Use the navigation keys to highlight a number from the
list, then press the SEND (left) soft key (
to dial that number.
Note: If Digit Dial frequently does not recognize your speech, you may want
to adapt (or "train") Digit Dial to better respond to your voice. After you
adapt Digit Dial, however, your phone is customized to your voice, and your
voice only. Others will not be able to use Digit Dial unless they reset the
phone to factory defaults. See "Set Digits—Adapt Digits" on page 152 for
more information.
46
key. The Voice
) or press