Talika TIME CONTROL+ Instructions For Use Manual page 25

3. The programme starts on contact with
the skin. The triangular head of the device
(gold-plated face electrode) must be in
direct contact with the epidermis. Make
sure your fingers touch the hand electrode.
PROGRAMME 1: the programme stops
automatically after 1 min, move the device
to another zone to resume another session.
PROGRAMME 2: the programme stops
automatically after 45 seconds, move the
device to another zone to resume another
session.
4. The unit automatically goes to sleep if it
is «idle» for 30 seconds. If it is reactivated,
it resumes the session. The start button
stays lit in blue or purple, depending on the
current session being paused. To reactivate
it, simply place the device on the area to
be treated.
5. If the device is not activated for 30
seconds, it turns off completely. To turn it
on again, it must be restarted from step 1.
6. If you need to turn it off without waiting 30
seconds,
2 seconds. The button will flash once in
blue and then turn off.
hold the start button for