Advertisement
4. charging
4.1.
The battery fitted to this lamp is considered to be a consumable item and its ability to accept charge will reduce over time. We will
warranty it against mechanical and electrical defect for a period of one year, this does not cover fair wear and tear. If the battery is not
properly charged before first use, or regularly conditioned, its capacity will diminish. Under these circumstances we will not replace the
battery even if it is less than one year old.
4.2.
Connect the charger into the charge socket on the lamp. Plug into power supply and turn on.
4.3.
When the battery has fully charged as shown by the battery charge indicator (approx 5.5hrs). disconnect from mains supply.
note: The lithium battery does not suffer from memory effect and once fully charged may be stored for up to six months without another
charge.
5. operation
5.1.
Release the clip on the base of the light and open the light to the required angle.
5.2.
Position the floodlight in the area that requires illumination.
5.3.
This led floodlight develops minimal heat and is not subject to the same restrictions that apply to halogen lamps that become too hot to
touch. We do however recommend that the floodlight should not be placed in cramped or restrictive situations and recommend the
following minimum distances between the light and any surface/object.
● 500mm minimum between the top of the light and any overhead surface, or objects.
● 200mm between sides of light and end or side walls, surfaces or objects.
● 1 metre minimum between the front of the light and any object to be illuminated.
5.4.
To operate press the switch on the edge of the light to turn on 50% illumination , Press again for 100%
illumination, Press again for economy setting (one panel). Press again to switch off.
warning! ensure the light is disconnected from the mains power supply when not in use ensure that the unit is cool and dry and
‰
is stored in a cool, dry, childproof area.
6. Maintenance
6.1.
Clean the casing externally (not the glass) with a moist cloth.
do not use solvents or abrasives.
8
6.2.
If necessary clean the glass with alcohol and a soft cloth.
environMent protection
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
weee regUlationS
dispose of this product at the end of its working life in compliance with the eU directive on Waste electrical and electronic equipment
(Weee). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
batterY reMoval
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products
containing batteries (as defined within these regulations), that they are registered with Valpak's registered compliance scheme. Jack
Sealey ltd's Batteries Producer Registration number (BPRn) is BPRn00705.
note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
important: no liability is accepted for incorrect use of this product.
warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey group, Kempson way, Suffolk business park, bury St edmunds, Suffolk. ip32 7ar
01284 757500
© Jack Sealey limited
01284 703534
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
lED191T | Issue2 (F23) 26/03/18
Advertisement
