Power Supply / Fuse; Cleaning; Note - Flash WHITEsmile Whitening Lamp Instructions For Use Manual

Whitening lamp
Table of Contents

Advertisement

1
2
3
4
5
6
7
8
9

9. Power supply / fuse

Double power supply switch with signals
„I" for ON and „0" for OFF.
100-240 V ~ 50 Hz–60 Hz VDE type float socket.
Double holder for No. 2 time delay fuses with
rapid disconnection.
Specifications are marked on close
to the power supply control box.
Control box is located under user interface box.

10. Cleaning

Before cleaning the device, switch it off. The device
can be cleaned with a soft cloth slightly moistened
with nontoxic and non-flammable solvents: tested
solvents available on the market are recommended.
Avoid the entry of liquid into device components.
Do not use strong solvents or sharp instruments.

11. Note

Keep out of children's reach. To be used exclusively
as described in this instructions for use. The product
may only be used in keeping with the specific inst-
ructions for use. WHITEsmile does not accept any
responsibility for damage resulting from failure to
comply with the instructions for use or for uses other
than those foreseen by the field of application for the
product. The user is responsible for experimenting
with the material for uses not explicitly described
in the instructions for use.
The descriptions and date reported herein are
approximate and not binding. The content of
this user's manual is subject to variations.
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents