Page 2
A LELIT PRO LINE PRODUCT Register your product on care.lelit.com Download the complete guide to get the most of your coffee machine PL62X and visit our Lelit Espresso YouTube channel for insights, tutorials, tips and tricks. Save the box and all the packing material!
Lelit Espresso - English Index Product overview Factory settings Equipment box Packaging First start-up How to install the resin water filter Espresso and coffee Steam and hot water Stand-by mode Limestone prevention Daily cleaning Weekly cleaning Annual cleaning Lights and states of the machine...
Page 4
PRO Line - MaraX - PL62X Pic 1 in the equipment...
Lelit Espresso - English 1. Product overview Mobile water tank cover Temperature mode switch Heated surface for cup grate Water tank (2,6L) Steam dispensing knob Grate for heated surface Pilot light machine ready Hot water dispensing knob Pilot light water tank full of water...
PRO Line - MaraX - PL62X 3. Equipment box 1 dose (9-11g) coffee filter LELIT 35L water resin filter 2 doses PLUS (18-21g) coffee filter Brush for group head cleaning Blind filter for backflushing Plastic spoon for coffee powder Tamper in stainless steel with red...
Lelit Espresso - English 4. Packing The packing of your coffee machine has been studied and produced to be re-used. Use the original box and all the packing elements in case you need to send the machine back to your reseller or to an authorized service centre, for ordinary or extraordinary maintenance.
PRO Line - MaraX - PL62X filled with water. Once the waiting time is over, the pilot light (4) will start flash- ing. Lift the group lever (14) completely. The brewing group (13) will start dis- pensing water (within 30 seconds). Let the water come out for about 30 seconds and then return the group lever to its initial position (Pic 5.3).
Lelit Espresso - English 7. Espresso and coffee Choose you r coffee filter, insert it into the portafilter (G) and fill it with the ade- quate quantity of ground coffee. Use the tamper (D) to press the coffee powder in the portafilter (G). Fix the portafilter (G) into the brewing group (13) and make sure the handle is aligned with padlock symbol present on the group (Fig 8.1).
PRO Line - MaraX - PL62X 8. Steam and hot water To obtain an optimal performance of the machine, lift the group lever (14) com- pletely and return it to its initial position about 30 seconds before using the steam wand or the hot water wand (7 or 15). Turn the knobs (3 or 12) anticlockwise to dispense steam or hot water (Pic 9.1).
Lelit Espresso - English Note. The Stand-by function can be disabled. For more details download the com- plete guide. 10. Limestone prevention To prevent limestone deposits and grant a better 10.1 result in the cup, use the water resin filter (H). The filter found in the equipment box has an autonomy tested for 35 l of water.
Note. For an optimal result we suggest you use our kit PLA9101 (not included) that contains a microfiber cloth with embroidered LELIT logo, a paintbrush with bristles in nat- ural fibres and a brush with nylon bristles. General cleaning. Use a soft cloth, preferably in microfiber, and moisten it with tap water to clean the stainless-steel appliance body of the machine (Pic 11.1).
Page 13
Lelit Espresso - English 12.1 12.2 12.3 10x10” Insert the portafilter (G) and the used filters into the jug but pay attention not to immerse the portafilter handle (Pic. 12.1). Add 2 bags of detergent powder (F or PLA9201). After 15 minutes, empty the jug and rinse the portafilter (G) and the filters with plenty of tap water.
The descaling of the hydraulic circuit of the machine must be done every year to ensure longevity and constant performances. This operation must be done by a specialized technician. You can see the centres authorized to run this procedure on our website: care.lelit.com. 14. Lights and states of the machine Pilot light is on;...
Page 15
Lelit Espresso - English State of the machine Temperature sensor NTC1 disconnected or damaged Contact the service centre Temperature sensor NTC2 disconnected or damaged Contact the service centre Boiler filling phase has exceeded the maximum time Check the correct position of the water tank (10) and remove eventual blockages.
Need help?
Do you have a question about the PRO Line MaraX PL62X and is the answer not in the manual?
Questions and answers