Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Celestron TetraView 44349
Summary of Contents for Celestron TetraView 44349
- Page 1 INSTRUCTION MANUAL MODEL #44349...
- Page 2 INTRODUCTION Thank you for purchasing the Celestron TetraView LCD Digital Unlike traditional microscopes, the Celestron TetraView LCD Digital Microscope with a 4.3-inch touch screen monitor. Your microscope is Microscope does not use eyepieces. You will view specimens on the a precision optical instrument, made of the highest quality materials. It is LCD screen.
-
Page 3: Specifications
SPECIFICATIONS MAGNIFICATION (POWER) MAGNIFICATION (POWER) Stage Mechanical Stage 3.5 in x 3.5 in (88 mm x 88 mm) Use the following table to determine the magnifi cation Use the following table to determine the magnifi cation of the different objective lenses in combination with of the different objective lenses in combination with 5 MP ½.5”... -
Page 4: Using An Sd Card
To begin, turn on the LCD monitor by pushing the power button (see clamp and directional knobs (see Figure 6). Figure 1). You will see “Celestron Digital Microscope” on the screen. The touch screen functions on the LCD module are mainly used for 1. - Page 5 5. Look at the LCD screen while turning the focus knob (Figures Diaphragm — Within the wheel are holes with three different 1 & 6) until the specimen comes into view. You may need to diameters, (1) 1 mm, (3) 3 mm, (6) 6 mm that limit the amount of adjust the stage movement knobs (Figure 6) slightly to center the light passing through to the specimen.
- Page 6 DIGITAL IMAGING VIDEO MODE You can take snapshots or a short video with your microscope using the built-in digital camera. With the SD card memory, you To take videos, change the “video” setting first. The icons on this do not need to use a PC or any other devices to do imaging. image (Figure 10) work the same way as in the snapshot mode with Transferring images to your PC for saving or printing is easy and the following exceptions:...
-
Page 7: Troubleshooting
The normal position is the 6 position (6 mm hole) for most applications. CARE, MAINTENANCE, AND WARRANTY Your Celestron microscope is a precision optical instrument and • Clean the outside surfaces (metal and plastic) with a moist cloth. should be treated with care at all times. Follow these care and •... - Page 8 05-19 © 2019 Celestron • All rights reserved Product design and specifications are subject to change without prior notification. celestron.com/pages/technical-support Telephone: 1(800) 421-9649 This product is designed and intended for use by those 14 years of 2835 Columbia Street • Torrance, CA 90503 USA...
Need help?
Do you have a question about the TetraView 44349 and is the answer not in the manual?
Questions and answers