Table of Contents
Advertisement
Tap Configure portable Wi-Fi hotspot.
5.
Create a new Network SSID name and then write it down.
6.
Confirm the Mobile AP service icon
7.
top of the screen.
Note: By default, the connection is open and not secured. It is recommended
that you access the Portable Wi-Fi Hotspot settings and create a
secure connection by using a password for communication.
Note: Using your 4G service and Portable Wi-Fi Hotspot drains your phone's
battery at a much faster rate than when using any other feature
combination.
The best way to keep using the phone as a hotspot is to have it
connected to a power supply.
To connect to the Hotspot:
Enable Wi-Fi (wireless) functionality on your target device
1.
(laptop, media device, etc.).
2.
Scan for Wi-Fi networks from the device and select your
phone hotspot from the network list.
• The SSID name for your phone's hotspot is determined by what you
entered into the Network SSID field.
• You can change the name by tapping Configure portable Wi-Fi
hotspot
Network SSID and changing the entry.
197
3.
4.
appears at the
To secure the Portable Hotspot service:
The two most common methods for securing your connection to
the Hotspot are to a security method (WPA2 PSK) and to Hide
your phone's SSID name.
1.
2.
3.
Important!: The more complex the password, the harder it will be for
4.
Select this Hotspot and follow your on-screen instructions
to complete the connection.
Launch your Web browser to confirm you have an Internet
connection.
Press
and then tap
Wireless and network
Tethering and portable hotspot
Portable Wi-Fi hotspot settings
hotspot.
Tap the Security field and select WPA2 PSK.
With security enabled, enter a new password into the
Password field.
intruders to break your security. It is recommended that you not
use names, birthdays, or other personal information.
Tap Save to store the new settings.
(Settings)
Configure portable Wi-Fi
Advertisement
Table of Contents
