Samsung M100 User Manual page 34

Setting up the recording function using the camera buttons
Selecting the self-timer
1. Rotate the Mode dial to select a desired
RECORDING mode.
2. Press the SELF-TIMER ( ) / RIGHT button
until the desired mode indicator appears on
the LCD monitor. A 10 second, 2 second,
Double self-timer or Motion timer icon
appears on the LCD monitor.
3. When you press the SHUTTER button, the
picture will be taken after the specifi ed time
has elapsed.
Self-timer mode indicator
Icon Mode
10SEC self-timer
Pressing the shutter button will allow an interval
2SEC self-timer
of 2 seconds before the image is taken.
A picture will be taken after about 10 seconds
and 2 seconds later a second picture will be
Double self-timer taken. When using the fl ash, the 2-second
self-timer may be delayed for longer than 2
seconds depending on the fl ash charging time.
The camera detects the subject's movement 6
Motion Timer seconds after pressing the Shutter button, and
the picture is taken when the movement stops.
[Selecting the 10 SEC self-timer]
Description
Motion Timer
Motion
Pressing the Shutter button after
setting the Motion Timer
Detecting the subject's movement
No movement is detected
The Motion Timer fl ows are as followings. (Movie mode excluded)
Selecting the Motion Timer
Confi rming the composition (Within 6 sec.)*1
(Swing your hands fully)*2 Stopping the detection (Do not move)
Taking an image (after 2 sec.)
*1. The camera detects the subject's movement 6 seconds after pressing
the Shutter button, so confi rm the composition within 6 seconds.
*2. Move your body or hands fully.
In the following cases, the Motion Timer may not operate.
The focus distance is over 3m.
The exposure is too bright or dark
In backlight conditions.
The movement is insignifi cant
The movement is detected beyond the
center part (50%) of the sensor where
the movement is recognized.
If the camera doesn`t sense any
movement for 30 seconds, or the
camera doesn't sense stillness after
sensing movement.
Icon & Self-timer lamp
Blink (1 second interval)
Blink (0.25 second interval)
Turn on and the image is taken after
2 seconds
Pressing the Shutter button
Starting the detection
The detection range of
Motion Timer
33