Quick view
If you enable Quick View before capturing an image, you can view the image you just
captured on the LCD monitor for the duration set in the [Q.VIEW] setup. Quick view is
possible only with still images.
Setting Quick View
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [Q.VIEW] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[OFF]
[1 ~ 3 SEC]
5. Press the menu button twice and the menu will disappear.
Initialization(RESET ALL)
All camera menu and function settings will be restored to their default values.
However, values for DATE/TIME and LANGUAGE will not be changed.
Initializing the Camera
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [RESET] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
If [YES] is selected : All settings will be restored to their defaults.
If [NO] is selected
5. Press the menu button twice and the menu will disappear.
84
: The quick view function can't be activated.
: The captured image is briefly displayed during the selected time.
: Settings will not be restored to their defaults.
2816
SETUP
USB
LCD
1 SEC
Q.VIEW
BACK:
SET:OK
2816
SETUP
LCD
YES
Q.VIEW
NO
RESET
BACK:
SET:OK