Download Print this page

Advertisement

Quick Links

User Manual ST-2300
Product Code.: 20 2300 556
Description
Description
Description
Description
Spray gun ST- - - - 2300
Spray gun ST
Spray gun ST
Spray gun ST
2300
2300
2300
The ST-2300 area of application is professional high pressure cleaning (hot/cold water). The grip housing is from impact-
resistant plastic. The valve body and connectors are corrosion-resistant. The trigger is equipped with a safety lock.
Intended Use
Intended Use
Intended Use
Intended Use
The spray gun is intended for dispensing fluids. These may be PED 97/23/EC Group II fluids, such as for example water
and conventional detergents or disinfectants. For further details see EEC Directive 67/548
Dispensing flammable, explosive, caustic or toxic substances is forbidden!
The spray gun must not be operated with abrasive substances.
The spray gun must only be used in a technically perfect condition, unmodified in any way, for the purpose intended, in
the awareness of safety requirements and potential hazards in compliance with these Operating Instructions. Only adults
trained in handling high pressure washers may use the spray gun.
Please also comply with the operating instructions for equipment and accessories connected to the spray gun including
regulations applicable to the detergents used.
Transportation and storage
Transportation and storage
Transportation and storage
Transportation and storage
Please ensure that the spray gun is protected from contamination during transportation and storage. Protect the spray
gun from frost. The effect of frost can damage the spray gun to such an extent that correct operation cannot be
guaranteed.
Suttner GmbH, Hauptstraße 15-17, 33818 Leopoldshöhe
Tel.: +49(0)5208 - 91 46 - 0, Fax: +49(0)5208 - 91 46 - 15
www.rm-suttner.com, Email: info@rm-suttner.com
1
Ver. 1.0

Advertisement

loading

Summary of Contents for R+M Suttner ST-2300

  • Page 1 2300 2300 2300 The ST-2300 area of application is professional high pressure cleaning (hot/cold water). The grip housing is from impact- resistant plastic. The valve body and connectors are corrosion-resistant. The trigger is equipped with a safety lock. Intended Use...
  • Page 2: For Your Safety

    User Manual ST-2300 Product Code.: 20 2300 556 Safety Safety Safety Safety Hazard Hazard Hazard Hazard If these instructions are not followed there is a danger of physical injury, danger to life and material damage! Please comply with the Operating Instructions!
  • Page 3 User Manual ST-2300 Product Code.: 20 2300 556 Danger of burning or scalding due to hot media! Danger of burning or scalding due to hot media! Danger of burning or scalding due to hot media! Danger of burning or scalding due to hot media! ▪...
  • Page 4: Technical Specification

    User Manual ST-2300 Product Code.: 20 2300 556 When spraying sensitive surfaces (e.g. vehicle tyres, painted surfaces) damage may occur. For sensitive surfaces do not use any fine needle jets and maintain a minimum jet spray distance. The minimum jet spray distance depends on the pressure and the surface to be cleaned.
  • Page 5 User Manual ST-2300 Product Code.: 20 2300 556 Working with the ST- - - - 2300 Working with the ST 2300 Working with the ST Working with the ST 2300 2300 Operate the spray gun only within the pressure, flow rate and temperature ranges indicated. Prior to commencement of work check the levels each time at the high pressure generator and adjust these if necessary.
  • Page 6 User Manual ST-2300 Product Code.: 20 2300 556 If the high pressure system has been used with hot water previously allow it to cool down to avoid the danger of scalding or burning before commencing assembly and maintenance work. Risk of injur...
  • Page 7 User Manual ST-2300 Product Code.: 20 2300 556 Please dispose of old units in an environmentally friendly manner Please dispose of old units in an environmentally friendly manner Please dispose of old units in an environmentally friendly manner Please dispose of old units in an environmentally friendly manner Old units contain valuable recycling materials which should be forwarded to a recycling facility.
  • Page 8 User Manual ST-2300 Product Code.: 20 2300 556 Diagrams Diagrams Diagrams Diagrams Suttner GmbH, Hauptstraße 15-17, 33818 Leopoldshöhe Tel.: +49(0)5208 - 91 46 - 0, Fax: +49(0)5208 - 91 46 - 15 Ver. 1.0 www.rm-suttner.com, Email: info@rm-suttner.com...

This manual is also suitable for:

20 2300 556