Honeywell CNI4 Quick Start Manual page 5

Step 4: Disconnect the serial cable interface connecting the Pulse Accumulator and the Cloud
Link 4G Modem
Step 5: Configure the Pulse Accumulator
1. Insert the male connector of the Pulse Accumulator into the female connector of the
USB-to-serial cable.
2. Connect the USB end of the serial cable to a PC.
3. Launch and login to the MasterLink desktop application.
4. Navigate to the Settings menu, set the baud rate to the recommended value (9600), and
click OK.
5. Click Connect to connect to the Pulse Accumulator.
CNI4 Quick Start Guide
Disconnect the RS232
connector from the Cloud
Link 4G Modem.
5