Table of Contents
Advertisement
DNA filter
Using the structure of DNA, the DNA filter is a new technology that screens selectively only toxic
agents. This enables a smarter air management.
028/036
1. Remove the front panel.
Grab the grooved side of the front
panel tightly and pull the bottom
side of the panel upwards to
remove the front panel.
2. Remove the Air filter.
Grab the handle and lift it up. Then, pull the Air filter towards you and slide it down.
3. Slide the DNA filter out to remove it from the slot.
The DNA filter can be placed in any of the 4 slots beneath the air filter.
4. Clean the DNA filter with a vacuum cleaner or soft brush.
5. Install the DNA filter back in position.
6. Reattach the front panel.
Insert the hooks located on the top of the panel into the correct slots then push in the
bottom part of the panel.
• Clean the DNA filter every 3 months. The cleaning term may differ depending on usage
• The expected life span of the DNA filter is 3 years.
AVXWB£ª£ª_IB IM_E_29815.indd 33
and environmental conditions.
cleaning and maintaining _33
2008-11-12 10:14:15
Advertisement
Table of Contents
