Baratza S913 How To Replace page 4

6. Remove the old planet carrier. There will be a second thin metal washer between the
planet carrier and the motor mount. If the metal washer does not come out with the planet carrier,
it will be nestled next to the motor. Discard the old planet carrier and the metal washer.
nd
2 metal washer (remove and discard)
7. Place the new thin metal washer onto the motor mount:
8. The new planet carrier will be tucked inside the new gearbox. Pull the planet carrier out of the
new gearbox. It will be very greasy (this is food-safe lubricant). Take care not to get these
parts dirty!
New planet carrier
New gearbox
Take care to keep these parts clean! It might be helpful to use a clean glove or paper towel
for this next step:
www.baratza.com support@baratza.com rev. 10/23/2018