Orbit OSLPIR240B Manual

OSLPIR240B
240° Professional Motion
Sensor
INTRODUCTION
OSLPIR240B is a 240 degree standalone motion
sensor with fully automatic indoor and outdoor
security/courtesy lighting control. An adjustable timer
lets you select how long the light stays on after
activation. The Lux and sensitivity settings are also
adjustable according to your needs.
This model comes with the following operation modes:
(1) Auto: automatic operation
(2) Manual override: When the light is on, turn the wall
switch off and on twice within 4 seconds to enter
manual override operation.
Note: Read this entire manual before you start to
install the system.
PRODUCT OVERVIEW

Main Body

Back Plate

Corner Mounting Plate

Attachment Ring

Lens

Control Knobs: Under the ring; from left to right:
Time, Sensitivity, and Lux control knobs

1
SAFETY NOTICE

Avoid installing the unit in storming or raining
weather.

Be sure to isolate or switch off power source
before installing or maintenance.

Make sure that the power wiring comes from
circuit with an external 16A miniature circuit
breaker for the short circuit protection or a
suitable fuse.
IMPORTANT
Installation must be
technicians who are informed about the standards
and technical requirements of the appliance and its
proper installation.
Check your local codes as they apply to your
situation. If the house wiring is of aluminum,
consult with an electrician about proper wiring
methods.
Before proceeding with the installation, TURN OFF
THE POWER TO THE LIGHTING CIRCUIT AT
THE CIRCUIT BREAKER OR FUSE BOX TO
AVOID ELECTRICAL SHOCK.
CHOOSING THE MOUNTING LOCATION
When deciding a proper location to install the unit,
please take the following points into consideration:

This unit is designed to be installed indoor or
outdoor on the wall/ceiling with the lens facing
downwards. Install the unit wrongly may impair
its functionality. (FIGURE 1a & 1b)
FIGURE 1a
performed by skilled