Advertisement
To replace the batteries in the remote control, use a screwdriver to unscrew and lift the battery
cover. Replace all batteries with 2 x AAA type batteries. Ensure you insert new batteries with the
polarities in the correct direction. Replace the battery cover and tighten the screw.
Remove batteries when unit is not being used for prolonged periods. Do not dispose of batteries
in fire as batteries may leak or explode. Do not recharge non-rechargeable batteries.
IMPORTANT! NEVER COVER THIS APPLIANCE!
The fan requires regular cleaning to ensure trouble free operation.
Ensure that the fan is switched off from the supply mains before removing the guard.
Unplug the fan from the mains supply before cleaning.
Use a damp cloth (not wet) to wipe the exterior of the fan to remove dust and dirt.
Use a vacuum cleaner to remove dust and fluff from around the grills.
Ensure the fan is dry before plugging back into the mains supply.
Do not attempt to dismantle the fan. There are no user serviceable parts. For service
or repair, contact an authorised electrical service technician.
Proof of purchase
To receive warranty retain receipt as proof of purchase. (Refer to back of booklet).
Operating your Fan cont.
Cleaning
Goldair – New Zealand
Monday – Friday 8am-5pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
info@goldair.co.nz
SUPPORT AND TECHNICAL ADVICE
Monday – Friday 8am-5pm
Goldair – Australia
Phone +61 (0)3 9365 5100
Phone 1300 465 324
info@cdbgoldair.com.au
Advertisement
