Selecting Fan Mode; Selecting The Turbo Function - Samsung MH020FVEA User Manual

Selecting Fan Mode

Selecting the Turbo Function

16
E-
Select Fan mode if you want to ventilate your room. It helps to refresh
the air in your room. You can adjust the fan speed in this mode.
1
Press the (On/Off) button.
Result:  The operation indicator on the indoor unit lights up.
 The air conditioner starts up in the mode you selected last.
 The indoor unit beeps.
2
Press the button on the remote control until Fan is displayed.
Result:  The indoor unit beeps each time you press the
 The air conditioner runs in Fan mode.
 The temperature is set automatically.
Note You can change modes at any time.
3
Press the button to adjust the temperature until the required setting is
displayed.
Low  Medium  High
Result: Each time you press the
4 To control the airflow direction, refer to page 20.
You can select the Turbo Function if you want to cool or heat your room as quickly
as possible. The Turbo function operates for 30 minutes with the maximum settings
before returning automatically to the mode and temperature previously selected.
1
Press the (On/Off) button.
Result:  The operation indicator on the indoor unit lights up.
 The air conditioner starts up in the mode you selected last.
 The indoor unit beeps.
2
Press the button.
Result:  The temperature and fan settings are adjusted automatically.
 The air conditioner cools or heats the room as quickly as
possible.
 After 30 minutes, the air conditioner is reset automatically to
the previous setting.
 You can select the Turbo function in Auto, Cool and Heat mode.
If you select this function in Dry or Fan mode, the mode
changes to Auto mode.
3
Press the button again to stop the Turbo Function before the end of the
30-minute period.
Result: The air conditioner is reset automatically to the previous setting.
4
To control the airflow direction, refer to page 20.
button.
button, the indoor unit beeps.