Rowenta Ultra Steam GS2010U1 Manual page 7

Lint pad
The lint pad must not be used when attached to appliance.
Threads, lint and hair can easily be removed with the lint pad by brushing the fabric slowly
from left to right.
The pad can be cleaned by brushing in the opposite direction right to left on a scrap of old
cloth.
Warning: Never touch the steam head until it is completely cool.
• Remove the lint pad from the steambrush by grasping on both sides
and pulling downwards. The lint pad should slide right off of the brush,
and clamp back on after use.
• For storage, attach the lint pad to the steam brush by lining up the slots
of the brush with the slots of the lint pad. Gently push the top of the
lint pad into place until it snaps in.
fter use
• Unplug the appliance. Empty the water remaining in the tank and leave unit on its side to
cool. fter the appliance has cooled down, it may be stored in the bag provided (depending
on model).
Warning: never forget to unplug your device and empty the tank after each use. While
not in use, you can hang the steambrush by its hook.
7
"Click" "Click"