Fault
Cause
Hard to move the
- Mop pad not properly
product on floor
installed.
- Mop pad too wet or dirty.
Floors are cloudy,
- Mop pad not
streaky or spotty after
properly installed.
mopping floor
- Mop pad too wet or dirty.
Customer Care
Please contact Hoover Customer Care: 1300 360 845 to find your local spare
parts provider.
Part
Water Tank
PCB/LED Light
Mop Pads 2pk
Mop Head
Filter
Descaling Solution 1 Litre
Solution
- Check to ensure the mop
pad is installed properly.
- Replace with a new
mop pad.
– Replace the mop pad with
a new, clean one for
effective cleaning.
– If initial use of steam mop,
past cleaning products may
have left a residue on your
floor, continue to go over
effected area until there is no
residue or steaks left behind.
Part Number
33151825
33200884
31400158
31151823
32200887
61101464
15.