Memory Function - Beaba 920328 Instructions Manual

1.Plug in the product
All the lights come on, the appliance beeps once and the lights go out.
2.Press the "Power" button to switch on the purifier
The "Power" button lights up and speed 2 switches on automatically (medium speed). Rainbow mode
(series of 7 different colours) is activated.
3.Select the speed
The product has 3 speed levels Low, Medium and High. The light strips at the ends of the control panel
indicate the speed selected. To adjust it, press the "Speed" button.
4.Night mode
Press the Night Mode button to activate night mode.
When this mode is activated the purifier works silently and all the lights go out.
To switch off this mode, press the "Night Mode" button again.
5.Negative Ion
When the purifier is switched on, press the "Negative Ion" button to start the Negative Ion mode. The
purifier releases millions of negative ions.
To switch off this mode, press the "Negative Ion" button again.
6.Night Light
a.When starting the purifier (Power), the night light comes on in rainbow mode.
b.Press "Night Light" once to switch the light to continuous blue.
c.Press "Night Light" a second time to switch the light off.
NOTE: the night light mode can be used when the purifier is not working. Just press the "Night Light"
button when the appliance is switched off, the continuous blue light comes on.
7.Replace filter
The appliance has a sensor that counts the filter's lifespan.
When the "Replace Filter" indicator comes on it means that the filter needs to be changed.
When the filter is dirty, the appliance is noisier and dirt may be found around the product.
The filter can be wiped delicately with a dry cloth.
NOTE: the filter's lifespan is based on the quality of the air inside your house and the length of use.
Using the purifier in a damp environment will reduce the lifespan of the HEPA filter.

8.Memory function

When the air purifier is switched off, it stores the previous programme used in its memory, including
the speed and the "Negative Ion" option.