Table of Contents
Advertisement
Quick Links
Congratulations on your purchase of an Arnott
to offer a high quality product at the industry's most competitive pricing. Thank you for your confidence in us
Proper installation is essential to experience and appreciate the benefits of this system. Please take a moment
to review these installation instructions before you begin to install these components on your vehicle. The
removal and installation of air suspension products should only be performed by a fully qualified, ASE
It is equally important to be aware of all necessary safety measures while installing your new Air Suspension
System. This includes proper lifting and immobilizing of the vehicle and isolation of any stored energy to
WARNING: The air suspension system is under pressure (up to 10 bar, or 150 lbf/in). Verify pressure has been relieved
and disconnect power to the air suspension system prior to disassembly. Do not allow dirt or grease to enter the system.
Always wear standard hand, ear, and eye protection when servicing the air suspension system.
Arnott
®
is committed to the quality of its products. If you have a question or problem with any Arnott product,
please contact Arnott by calling 800-251-8993 during normal business hours or email techassistance@arnottinc.com.
(In the EU please call +31 (0)73 7850 580 or email info@arnotteurope.com)
1
P-3243
AIR SUSPENSION COMPRESSOR
2013-2019 CADILLAC XTS (EPSILON II)
air suspension product. We at Arnott Incorporated are proud
®
and our product.
Certified, professional.
prevent personal injury or property damage.
"Engineered to Ride, Built to Last
3243
P-
ARNOTT
"
™
REV 1
04/18/2019
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Arnott P-3243
Summary of Contents for Arnott P-3243
- Page 1 Arnott ® is committed to the quality of its products. If you have a question or problem with any Arnott product, please contact Arnott by calling 800-251-8993 during normal business hours or email techassistance@arnottinc.com. (In the EU please call +31 (0)73 7850 580 or email info@arnotteurope.com)
- Page 2 Under no circumstances should any work be completed underneath the vehicle if it is not adequately supported, as serious injuries and death can occur. AIR SUSPENSION COMPRESSOR REMOVAL RAISE VEHICLE. REMOVE LEFT SIDE REAR WHEEL. (FIGURE 1) FIGURE 1 P-3243 REV 1 04/18/2019...
- Page 3 PLASTIC SHIELD TO EXPOSE THE VEHICLES AIR SUSPENSION COMPRESSOR. (FIGURE 2) FIGURE 2 DISCONNECT THE ELECTRICAL CONNECTION. (FIGURES 3, 4) FIGURE 3 FIGURE 4 UNROUTE THE EXHAUST HOSE FROM THE FRAME FOR REMOVAL. (FIGURES 5, 6) FIGURE 5 FIGURE 6 P-3243 REV 1 04/18/2019...
- Page 4 DISCONNECT THE AIR FITTINGS AND LINES FROM BOTH (2) REAR AIR SPRINGS. UNCLIP AND UNROUTE THE AIR LINES FROM THE FRAME FOR REMOVAL. (FIGURES 7, 8, 9, 10) FIGURE 7 FIGURE 8 FIGURE 9 FIGURE 10 REMOVE THE THREE (3) COMPRESSOR MOUNTING BOLTS. (FIGURES 11, 12) FIGURE 11 FIGURE 12 P-3243 REV 1 04/18/2019...
- Page 5 Do not remove the air fitting from the air suspension compressor. Doing so may cause damage and/or void warranty. Remove the white shipping pin from the new air fitting and insert the air line until fully seated. INSTALL THE NEW ARNOTT COMPRESSOR INTO THE VEHICLE. (FIGURE 15) FIGURE 15...
- Page 6 INSTALL BY SLIDING THE ATTATCHED MOUNTING BOLTS (2) OF THE COMPRESSOR INTO THE HOLES LOCATED ON THE FRAME. SECURE BOLTS AND TIGHTEN TO MANUFACTURER’S SPECIFICATIONS. (FIGURES 16, 17) FIGURE 16 FIGURE 17 TIGHTEN REMAINING (1) COMPRESSOR MOUNT BOLT AND TIGHTEN TO MANUFACTURER’S SPECIFICATIONS. (FIGURE 18) FIGURE 18 P-3243 REV 1 04/18/2019...
- Page 7 REROUTE THE AIR LINES TO THE SPRINGS, CLIPPING THE AIR LINE TO THE FRAME WHERE APPLICABLE. REROUTE THE EXHAUST HOSE AND CLIP TO THE FRAME WHERE APPLICABLE. (FIGURES 20, 21, 22, 23) FIGURE 20 FIGURE 21 FIGURE 22 FIGURE 23 P-3243 REV 1 04/18/2019...
- Page 8 PULL SHIPPING PINS FROM AIR SPRING FITTINGS AND PUSH IN NEW COMPRESSOR AIR LINES UNTIL LINES ARE FIRMLY SEATED. (FIGURES 24, 25) FIGURE 24 FIGURE 25 RECONNECT THE COMPRESSORS ELECTRICAL CONNECTION. (FIGURES 26, 27) FIGURE 26 FIGURE 27 REINSTALL WHEEL WELL LINER AND FASTENERS. REINSTALL WHEEL. LOWER VEHICLE. INSTALLATION COMPLETE. P-3243 REV 1 04/18/2019...
Need help?
Do you have a question about the P-3243 and is the answer not in the manual?
Questions and answers