MuxLab 500219 Quick Installation Manual

Specifications
Environment Audio Distribution using CAT cabling
Device Targeted Audio System using the Muxlab HiFi Balun.
30W RMS maximum (PMPO) per channel into 8 ohm
Power Output
15 – 20,000 Hz (+/- 3 dB)
Frequency response
Front Control Volume, push to save power-up default
Front Display Input level left and right: L R
Volume level: ((o)), Set volume memory: M
Mounting Brackets Muxlab M500917
(not included)
Power Requirement 120W max, 24V 5A.
Compatible Source Unit Audio matrix: 500210
Balun: 500019, 500027, 500028*, 500030 (*recommend)
Cabling Requirement Any 4-pair straight cable UTP Cat5, 5E or 6
Connectors Input: One RJ45 connector
Output: Four binding posts: red & black, for each channel
Power input: One power coaxial jack, 2.0 mm
RJ45 Pin Configuration Pin 1+2, 3+6 for audio left and right
Operating : 32° to 90°F (0° to 40°C)
Temperature
Storage: -40° to 185°F (-40° to 85°C)
Humidity Maximum 90% (non-condensing)
Enclosure Aluminum, black anodized.
4" x 5" x 2" (9 x 13 x 5 cm)
Dimensions
Weight 5 lbs (2 kg)
Warranty 2 Years
Order Information M500219 Analog Audio Balun Amplifier
© MuxLab Inc. 94-000788-A
ANALOG AUDIO BALUN AMPLIFIER
500219
Quick Installation Guide
Overview
The Analog Audio Balun Amplifier allows one (1) analog source using the Muxlab
Audio Balun (500028) or Muxlab Audio Matrix Switch (500210) to feed a 30W/channel
stereo amplifier using UTP Cat5e/6 cable.
Applications
Audio Distribution Systems
8495 Dalton Rd, Montreal, Quebec, Canada. H4T 1V5
Tel: (514) 905-0588
Toll Free (North America): (877) 689-5228
E-mail: videoease@muxlab.com
Fax: (514) 905-0589
URL: www.muxlab.com