Download Print this page

Salamander UNIFI HUDDLE LITE CAFE UHL40A Assembly Instructions page 5

Advertisement

3. install WALL FASTENERS (most applica
Install wall fasteners to marked location on wall & fasten table.
Drill 1/2" diameter hole. Hold metal channel
A
flat alongside plastic straps and slide chan-
nel through hole.
Snap straps at wall by pushing side to
C
side,snapping of straps level with flange
of cap.
4B. install WALL FASTENERS (ALTERNATE
WOOD: Locate two framing studs using a stud finder device.
A
MASONRY: Place brackets in desired location.
B
Use a 3/16" [5mm] drill bit and drill holes 2.5" [64mm] deep.
Salamander Unifi Huddle Lite, Cafe
301-055
3/8 x 2" Alligator Wall Anchors
5 of 5
Hold ends of straps between thumb and
B
forefinger and pull toward you until channel
rests flush behind wall. Slide plastic cap along
straps with either hand with flange of cap is
flush with wall.
Move cabinet to wall and attach bracket.
D
Insert bolt through Bracket and tighten
until snug against wall.
300-470
5/16" Flat Washer
301-730
5/16 x 2.5" Lag Bolt
tions)
)
501-730 [6.19]

Advertisement

loading