Table of Contents
Advertisement
Preparing the Sports HD BulletCam
The Sports HD BulletCam is almost good to go right out of the box.
You won't need to configure anything or fiddle with confusing
settings - that's all automatic. All you'll need to do before the Sports
HD BulletCam can start recording is:
• Insert a microSD card.
• Charge the built-in battery.
You can use any microSD card, up to 32GB.
You can store approximately 15 ~ 20 minutes worth of video per
gigabyte (GB). We recommend using cards larger than 4GB to
ensure that the Sports HD BulletCam won't run out of storage space
whilst you're filming.
Of course, if you only want to record ten minutes at a time, you
could get away with a smaller card. But remember, when it runs out
- that'll be all she wrote!
For reliable performance, we strongly suggest that you
use a card with a speed rating of "Class 4" or higher.
Look for these symbols:
• The SD card slot is located on the rear of the Sports HD BulletCam
beneath the end cap.
• Orient the microSD card so that the text is facing away from you.
You'll see the metal contacts on the left hand side of the card
facing you.
• Gently push the microSD card into the slot. Be careful that it goes
in correctly - if it misses the slot or is inserted at an angle, it could
become jammed.
• The card will "click" into place once fully inserted.
• To remove the card, simply push it in. This will release the locking
mechanism, and the card will spring out.
8 8 8
Choosing a microSD card:
Inserting a microSD card:
4 6
Advertisement
Table of Contents
