Advertisement
Quick Links
PRECISIONEERED RELOADING EQUIPMENT
We think that we make the very best reloading equipment in the world.
If you agree, please tell your friends.
If you disagree, tell us we want to do something about it!
Customer Service
1-800-533-5000 (US or Canada) or 530-533-5191
Hours: Monday - Thursday, 6:30 a.m. - 4:00 p.m. Pacifi c Time
(hours may vary)
e-mail: rcbs.tech@atk.com or visit our website at www.rcbs.com
RCBS 605 Oro Dam Blvd. East Oroville, CA 95965
Federal Premium Ammunition - RCBS - Alliant Powder - CCI
Speer Ammo - Speer Bullets - Fusion Ammunition
Estate Cartridge - Blazer Ammunition - Force on Force
Weaver - BLACKHAWK! - Champion - Gunslick Pro - Outers
Buck Commander - Ramline - Redfi eld - Shooters Ridge
7200497/0112
Primer Pocket Swager —
Bench Tool
PRODUCT INSTRUCTIONS
Advertisement
Related Manuals for RCBS Primer Pocket Swager
Summary of Contents for RCBS Primer Pocket Swager
- Page 1 RCBS 605 Oro Dam Blvd. East Oroville, CA 95965 Federal Premium Ammunition - RCBS - Alliant Powder - CCI Speer Ammo - Speer Bullets - Fusion Ammunition Estate Cartridge - Blazer Ammunition - Force on Force...
- Page 2 LIFETIME LIMITED WARRANTY rush - load at a leisurely pace. Your Primer Pocket Swager—Bench Tool is warranted to be free from defects in • Always wear adequate eye protection to protect your eyes from flying particles. material or workmanship for lifetime of the original consumer purchaser. All RCBS You assume unnecessary risk when reloading without wearing safety glasses.
-
Page 3: Record Keeping
• Never attempt to guess at the identity of your ammunition Because RCBS has no control over the choice of components, the manner in which they are assembled, the use of this product, or the fi rearms in which the resulting ammunition may be used, we assume no responsibility, expressed or implied, for the use of ammunition reloaded with this product. -
Page 4: Installation
Mount it to a fl at stable surface as you see fi t using appropriately sized hardware. Photo 2. Cam Handle Assembly The Swager Tool can be installed onto an RCBS Accessory Base Plate-2 (#9280, sold separately) in holes labeled C & D using the provided 3/8-16 SHCS. - Page 5 FUNCTION ADJUSTMENT First sort cases by brand before swaging. DIffi erent brands of cases have different Note: Reference the part schematics on page 14 of this booklet for more information. web thickness which will affect the swaging repeatability. Swaging Rod Alignment Adjustment Make sure the Swager Head is retracted by rotating the Cam Handle CCW.
- Page 6 Changing to Large Pocket Swaging Now rotate the clevis and push the Small Swager Head out of the Swager Base (Photo 12). For swaging cases with large primer pockets, you must change the Swager Rod and Swager Head to large confi gurations. With the Cam Handle in the CCW position, remove the Case Base Plate.
-
Page 7: Maintenance
Reference the part schematic on page 14 for more information. 3/16” hex key wrench (Photo 16). Occasionally clean your Primer Pocket Swager—Bench Tool to keep the pivot points free of debris, brass shavings, etc. Dissassemble and clean under the Cam Assembly and the Swager Head. - Page 8 ITEM # PART # DESCRIPTION QTY. 709300 Base 709309 Head Bushing 709313 Adjustment Disc 188109 5-40 x 3/8L SHCS 709311 Pivot 109200 Dowel Pin 1/8 diam x 1/2 L 109260 Bow Washer 3/8 ID 186106 3/8-16 Nyloc Nut 709304 Cam Plate 109202 Cam Bolt 709302...