Related Manuals for CDL HOBBY PRO
Summary of Contents for CDL HOBBY PRO
- Page 1 Version 1.2 15/12/2020 OWNER’S HOBBY PRO MANUAL EVAPORATOR Hobby Pro evaporator shown with the optional 3-way pan (670090214) © All rights reserved - CDL Maple Sugaring Equipment...
- Page 2 Thank you for choosing a CDL wood evaporator. Our 40 years of experience serving maple syrup producers means that you’ve purchased a high-quality, powerful piece of equipment. INFORMATION Record these details for future reference Brand: ________________________________________________ Date purchased: ________________________________________ Model number: _________________________________________...
-
Page 3: Table Of Contents
We strongly recommend that you contact your insurance company to ensure that the evaporator is installed according to their safety rules, as companies have different requirements. CDL Maple Sugaring Equipment... -
Page 4: Basic Components Included
DESCRIPTION 19 FIRE BRICKS 670090213 WHEEL KIT 670090217 1-1/4" x 4-1/2" x 9" 670090214 3-WAY PAN 670090218 STOVE PAN 670090215 FLAT BOTTOM PAN 67WPCO32 PAN COVER 670090216 WATER LEVEL EITC0306 THERMOMETER 670090213 670090214 670090215 670090216 670090218 CDL Maple Sugaring Equipment... -
Page 5: Assembly And Installation
• Please make sure to follow the steps below to ensure proper operation of the evaporator. • Do not forgot to paint the components before assembling the unit. Let the parts dry for at least 8 hours before assembling. CDL Maple Sugaring Equipment... - Page 6 CDL Maple Sugaring Equipment...
- Page 7 STEP 1 CDL Maple Sugaring Equipment...
- Page 8 STEP 2 CDL Maple Sugaring Equipment...
- Page 9 STEP 3 CDL Maple Sugaring Equipment...
-
Page 10: Cutting Insulation For The Door And Front And Back Plates
2. Next, insulate the front panel with piece P1. Once the wool has been placed, carefully cut around the edges of the door. 3. Insulate the rear panel using piece P2. Carefully cut a 6” diameter opening for the stack. CDL Maple Sugaring Equipment... -
Page 11: Bricking
You can order bricks as an add-on to your order or go to your nearest CDL distributor. Refer to step 5 on page 13 for instructions on bricking. Once the arch has been bricked, use the rest of the wool to insulate the sides that aren’t covered by the bricks. - Page 12 STEP 4 Door assembly CDL Maple Sugaring Equipment...
- Page 13 STEP 5 Bricking CDL Maple Sugaring Equipment...
-
Page 14: Operating The Evaporator
• Repeat each time the temperature reaches 7 degrees above the boiling point. Adjusting the draft: The evaporator’s draft is adjusted by opening and closing the draft hatch (step 4 - item 8). The smaller the gap, the lower the draft. CDL Maple Sugaring Equipment... -
Page 15: Warranty
Your evaporator is covered by a two year limited warranty. For two years from your original date of purchase, Les Équipements d’Érablière CDL (CDL), will replace or replace any parts of this evaporator that prove to be defective in materials or workmanship when such evaporator is installed, used and maintained in accordance with the provided instructions. - Page 16 CDL shall not be liable for consequential or incidental damages such as property damages and incidental expenses or loss or revenues caused by any event covered by this warranty.