Before Using For The First Time; Cleaning And Heating Up For The First Time; Guide To The Appliance - KKT KOLBE WS1503S User Manual

Before using for the first time

Before using for the first time
A display test is carried out for 10 seconds after the
appliance has been installed and after a power cut.
The fan comes on at the same time.
The appliance cannot be used during this time.

Cleaning and heating up for the first time

• Remove any protective foil and sticky labels.
• Remove the anti-slip mat and, if applicable, the rack
from the drawer, and sponge both with warm water and
a little washing-up liquid. Dry using a soft cloth.
• Wipe the appliance inside and out with a damp cloth
only, and then dry with a soft cloth.
• Replace the anti-slip mat and the rack (if applicable) in
the drawer.
Then heat the empty drawer for at least two hours.

Guide to the appliance

Control panel
Anti-slip mat: For keeping crokery secure
(Optional accessories)
For appliances with no handle: Press the middle of the
drawer to open or close it.
When opening, the drawer pops out slightly. You can then
pull it out towards you.
30
• Switch the appliance on by touching the
• Touch the sensor repeatedly until the correspon-
ding LED lights up.
• Touch the sensor repeatedly until the LED on the far
right lights up.
• Touch the sensor repeatedly until 2h lights up.
• Close the drawer.
• The warming drawer is fitted with a softclose self-
closing mechanism.
• It also has a contact switch, which ensures that
the heating element and fan in the appliance only
work when the drawer is closed.
Metal components have a protective coating which may
give off a slight smell when heated up for the first time.
The smell and any vapours will dissipate after a short
time,and do not indicate a faulty connection or appliance.
Ensure that the kitchen is well ventilated whilst the appli-
ance is being heated up for the first time.
sensor.