Land Pride RCR1860 Operator's Manual page 38

Section 7: Features & Benefits
Section 7: Features & Benefits
.
Features
Surpassed rugged
industry standards
5 Year gearbox warranty
Cat. 3 driveline
with shearbolt
Cat. 3 driveline with
2-plate slip-clutch
Dual position clevis type
3-point floating top link
Lower clevis type
3-point hitch
Heavy 10 gauge deck construction
Box tubing deck supports
Fully welded deck
Extended cutter front
Round back design
7 1/4" Deck height on RCR1860
8 7/8" Deck height on RCR1872
1 1/2" to 13" RCR1860 Cutting height
1 1/2" to 11 1/2" RCR1872 Cutting height
Full length skid shoes
1/2" x 3" Heat-treated
free swinging blades
Splined blade bar hub
10 Gauge stump jumper
High blade tip speed
RCR1860 = 16,360 FPM
RCR1872 = 14,853 FPM
15"Laminated tailwheel
4" x 16" Solid rubber tailwheel
Heavy-duty spindle
on tailwheel
Guarding
Driveline Holder
34
RCR1860 & RCR1872 Rotary Cutters 312-849M
Table of Contents
RCR1860 & RCR1872 Models
All Land Pride cutters have been designed and tested and meet rigorous voluntary
testing procedures specified by ANSI.
Shows our confidence in the gearbox integrity.
Shearbolt offers maximum driveline protection.
Slip-clutch driveline offers convenience for continual work.
Permits deck to follow the terrain for an even cut. Additional set of holes for tractors
with shorter top links.
Allows for ease of hook-up to tractor. Also adds additional strength allowing for an
even pull from the tractor's lower arms, vs. pulling on a single pin design.
Can withstand more abuse than lighter gauge decks.
Makes for a stronger rigid deck.
Robotic welded. Adds additional strength.
For increased material flow and added protection.
Helps discharge grass better than enclosed or partially enclosed cutters.
Allows cutter to handle heavy cutting conditions.
Provides for a wide range of cutting conditions.
Provides sidewall reinforcement and full protection to bottom of sidewall.
Free swinging protects from obstructions. Heat-treated offers longer life.
Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
Standard round stump jumper slides over stumps, rocks, and debris.
Ensures clean cut.
Laminated material is long lasting in rough conditions.
Can't go flat.
Tailwheels take a beating, 1 1/4" spindle gives the strength to protect tailwheel
assembly.
Protect against flying debris. Customer must choose to include chain or rubber on
the front and rear. Rear Metal Band standard.
Keeps driveline up out of dirt. Easier hook up of driveline.
Benefits
10/23/20