Land Pride RCR1860 Operator's Manual page 15

Introduction
Introduction
Land Pride welcomes you to the growing family of new
product owners. This Rotary Cutter has been designed
with care and built by skilled workers using quality
materials. Proper assembly, maintenance, and safe
operating practices will help you get years of satisfactory
use from this product
Application
Land Pride's RCR18 Series Rotary Cutters are built and
designed by Land Pride for cutting on gentle slopes or
slightly contoured right-of-ways, pastures, around the
farm, or around town. The cutting widths, 60" for
RCR1860 and 72" for RCR1872, are compatible with the
more maneuverable 20 to 65 horsepower tractors with
540 rpm power take-off speed. The cutters have a
category I
3-point hitch and are Quick-Hitch adaptable. They are
offered with a standard ASAE Category 3 driveline with
either shearbolt or slip-clutch protection. Also, they are
offered with either a laminated or a solid rubber tailwheel.
RCR18 Series Cutters cut through grass, weeds, and
light brush up to 2 in. diameter. The RCR 1860 has a
cutting height range of 1-1/ 2" to 13" and the RCR1872
has a cutting height range of 1-1/2" to 11-1/2". Cutting
blade tip speed for the RCR1860 is 16,363 FPM and for
the RCR1872 is 14,955 FPM. These units come with 10
ga. (.135" thick) x 24" diameter standard-duty stump
jumpers and welded on full length skid shoes. A metal
band shield is standard equipment for the rear. Optional
shields for the front and rear are rubber deflectors and
chain guards.
See "Specifications & Capacities" on page 32 and
"Features & Benefits" on page 34 for additional
information and performance enhancing options.
Using This Manual
•
This Operator's Manual is designed to help familiarize
the operator with safety, assembly, operation,
adjustments, troubleshooting, and maintenance. Read
this manual and follow the recommendations to help
ensure safe and efficient operation.
•
The information contained within this manual was
current at the time of printing. Some parts may change
slightly to assure you of the best performance.
•
To order a new Operator's or Parts Manual, contact
your authorized dealer. Manuals can also be
downloaded, free-of-charge, from our website at
www.landpride.com
Terminology
"Right" or "Left" as used in this manual is determined by
facing forward in the direction the machine will operate
while in use unless otherwise stated.
Definitions
IMPORTANT: A special point of information related
to the following topic. Land Pride's intention is this
information must be read & noted before continuing.
10/23/20
Table of Contents
NOTE: A special point of information that the
operator should be aware of before continuing.
Owner Assistance
The dealer should complete the Online Warranty
Registration at the time of purchase. This information is
necessary to provide you with quality customer service.
The parts on your Rotary Cutter have been specially
designed by Land Pride and should only be replaced with
genuine Land Pride parts. Contact a Land Pride dealer if
customer service or repair parts are required. Your Land
Pride dealer has trained personnel, repair parts, and
equipment needed to service the implement.
Serial Number
For quick reference and prompt service, record model
and serial number on the inside cover page and again on
the warranty page. Always provide model number and
serial number when ordering parts and in all
correspondences with your Land Pride dealer. For
location of your serial number plate, see Figure 1.
Further Assistance
Your dealer wants you to be satisfied with your new
Rotary Cutter. If for any reason you do not understand
any part of this manual or are not satisfied with the
service received, the following actions are suggested:
1. Discuss any problems you have with your implement
with your dealership service personnel so they can
address the problem.
2. If you are still not satisfied, seek out the owner or
general manager of the dealership, explain the
question/problem, and request assistance.
3. For further assistance write to:
Figure 1
Land Pride Service Department
1525 East North Street
P.O. Box 5060
Salina, Ks. 67402-5060
E-mail address
lpservicedept@landpride.com
RCR1860 & RCR1872 Rotary Cutters 312-849M
21417
11