Download Print this page

Doss ZD-929C Quick Start Manual page 2

Temperature controlled soldering station

Advertisement

Since mishandling may lead to fire, be sure to comply with the following safety precautions:
Do not touch metallic parts near the soldering tip.
Do not use this system near flammable items.
Advise others in the work area that the unit can reach very high temperatures and should be considered
potentially dangerous.
Turn off the power switch when unit is not in use.
Before replacing parts or storing the system:
1. Turn off the power.
2. Unplug it.
3. Allow soldering iron time to cool to room temperature.
Warning: The soldering iron should always be placed in the stand when not in use.
A fire may result if the appliance is not used with care, therefore:
 Caution when using in places where there are combustible materials.
 Do not apply soldering tip to the same place for a long time.
 Do not use around or near explosive materials.
 Place the soldering iron in its stand after use and allow it to cool to room temperature before storage.
 Do not leave the appliance unattended when on.
6. Caution
Do not use this tool for any applications other than soldering or desoldering.
Do not wrap the iron against the workbench or otherwise subject the iron to severe shocks.
Do not file the soldering tip to remove any oxide, please wipe the tip on the cleaning sponge.
Use only accessories or attachments that are approved for use with this soldering station. Use of unapproved tools and
other accessories can lead to potential injury, and void any warranty.
Please turn off the power before connecting or disconnecting the soldering iron.
6.1 Before use, the soldering station should be carefully inspected for damage. Please make sure that all power
connections are properly secured. Damaged safety devices such as the soldering iron holder and other parts must be
repaired or replaced by a qualified technician prior to use.
6.2 Do not use this soldering tool in a moist or wet environment. The soldering iron should be placed in the holder
after use.
This soldering station must be kept out of the reach of children. This device is not intended for use by
individuals with reduced physical, sensory or mental capabilities, or lack of training, experience and knowledge,
unless a person responsible for their safety has provided supervision or instruction concerning the use of this
device.

Advertisement

loading