P+L Systems Insect-O-Cutor IND35 Quick Start Manual

Professional Glueboard Insect Control
Please read these instructions carefully and store in a safe place
for future reference.
IND35
As part of the Insect-O-Cutor
IND35 is an easy to service and highly effective
utilises highly effective Synergetic
use with a high specification glupac
from coated mild steel, IND35 can be wall or desk mounted .
CONTENTS OF PACKAGE
- 1 x IND35 flykiller
- 2 x 15W 18" Shatterproof Synergetic UV tubes
- 1 x glupac pheromone impregnated glueboard
®
- 3 x screws and wall plugs
- 1 x Mains cable (Type X)
WARNING - THIS APPLIANCE MUST BE EARTHED
INSECT CONTROL PRODUCTS
IND35 utilises high powered Synergetic
insects and retains the caught insects on a glueboard for
inspection or hygienic disposal. Synergetic
ultraviolet light and visible green light to attract a wider range of
flying insects.
WARNING
IND35 is not to be used by children or persons with reduced
physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or
instruction.
Children should be supervised to ensure they do not play with
the appliance.
If the mains cable is damaged it must be replaced by a
specialist mains cable available from P+L Systems Ltd or your
supplier.
This appliance is not suitable for barns, stables, or similar
locations.
POSITIONING AND GUIDANCE FOR USING IND35
THIS UNIT IS FOR INDOOR USE ONLY.
IND35 should ideally be fixed around two meters above the
ground, preferably in the darkest place within the area to be
protected. Do not position the unit close to windows, skylights or
other sources of light, or where it may be obscured by furniture,
doors or other obstacles. Ideally, IND35 should be visible from
every part of the area to be protected.
IND35 should ideally be in operation for 24 hours a day, ensuring
your premises are kept free of flying insects. Insects are most
attracted to IND35 at night when there is no competition from
daylight or other light sources.
GUARANTEE
IND35 has a five year guarantee and if maintained as
recommended in these instructions, should continue to work for
many years.* Use of non-approved consumables may invalidate
the guarantee. Ensure genuine
conjunction with this product.
*Excludes tubes, glueboards and starters. Does not cover breakdown due to misuse, incorrect
operation or use in an incorrect application.
brand of insect control products,
®
flykiller which
UV tubes and is designed for
®
glueboard. Constructed
®
(Fitted)
tubes to attract flying
®
tubes combine both
®
glupac glueboards are used in
®
I NSTALLATION
INSTALLATION SHOULD BE CARRIED OUT BY SERVICE
PERSONNEL ONLY.
IND35 has a swing open front, which allows simple and quick
access to the inside of the flykiller for installation and
servicing.
Install IND35 by offering the product up to the wall and
marking the three fixing centers. Then drill holes and fit the
supplied wall plugs and screws. (For specialist wall surfaces
such as plasterboard, appropriate wall plugs should be used.)
Then hang the product onto the mounting screws.
Once IND35 is installed in position, fit the
place as described in the glueboard replacement section of
this document. Use the removable mains lead and plug to
connect IND35 to an appropriate rating, as specified on the
specification label found on the top of the product.
CLEANING
CLEANING SHOULD BE CARRIED OUT BY SERVICE PERSONNEL
ONLY, AFTER ENSURING THAT THE UNIT IS DISCONNECTED
FROM THE MAINS SUPPLY.
It is recommended that cleaning is carried out regularly when
the glueboard is replaced. Once the glueboard is removed,
the unit should be thoroughly wiped down with a damp
cloth, removing any build up of dirt. Ensure the unit is
completely dry before reconnecting it to the power supply.
IND35
glupac glueboard in
®
IND35