Specification - YIHUA 853 Series Instruction Manual

1. Inherite the characteristics of the 853A that the air gun heating element is made
of ceramic heating core, and the heating wire is tightly wound on the ceramic
skeleton with rapid and uniform heating. With the upgraded version of the fan,
air volume is stronger than the ordinary fan and the service life is longer with
spiral wind.
2. The machine has a self-test function full intelligent over-temperature, short-
circuit, overload and fault display and protection functions.
3. Temperature correction function:
Or replace the heating elements, soldering iron tips etc. Spare parts caused by
temperature deviation, can use this function calibration temperature. The
correction temperature range is -50°C~+50°C.
4. Celsius/Fahrenheit temperature display function:
Meet different market needs to design the temperature display mode, you can
choose under customary interest.
853AAA
Inherite the characteristics of the 853AA, add 4 humanized function:
1. Digital temperature correction function, the soldering iron temperature and
display temperature deviation which caused by the environmental impact or
replacement of heating element, iron tips and other spare parts, you can use
this function to correct.
2. Air gun manual / automatic function:
A. When choosing the automatic function, put the gun handle back on the
holder, the machine automatically cut off the heating up and cooling, its
effectively improve the heater service life and energy saving, good for
environmental protection and high safety factor. can be effective to avoid hot
air gun handle caused by fire or other accidents.
B. When choosing the manual function, when the gun handle back on the
holder ,that the gun is not cool and keep in work. Its very suitable for frequent
operation and save cooling and heating time to improve work efficiency, it is
recommended to use the manual function status was finished, please switching
back to the automatic function to improve safety!
3. The air gun without wind protection function, when the air gun stop sending
wind abnormally ,during the using process, the heating element will stop
heating to prevent burn the handle in the windless condition. It is greatly
improving the product safety.
4. Add to soldering iron function, iron part used imported heating elements,
heating up quickly, the temperature is stable, long service life. Anti-static
design to prevent static damage to delicate delicate SMD components.
853AA
13
III. Specification
Model 853A
Power supply voltage
AC
110V
±10%
60Hz/AC
220V~240V
50Hz

≤500W
Power
L250xW220xH90mm ±5mm
Size
Weight 3.0kg
Work environment
Storage environment
Store humidity
Preheating station
50~300°C or 50~400°C / 122~572°F or 122~752°F
Temperature Range
Temperature Stability
Display Type
Area
Hot Air Reworks
Airflow type
Fan air flow
Temperature Range
NO
Temperature Stability
Display Type
Handle cable length
Soldering Iron
Temperature Range
Temperature Stability
Tip of ground voltage
Tip ground impedance
Display Type
Handle cable length
853AA 853AAA
≤1200W ≤1270W
L320xW220xH100mm ±5mm
4.5kg 5.6kg
0~40°C/32~104°F
-20~80°C/-4~176°F
35%~45%
±2°C（static）
LED
120x120mm
Brushless fan gentle wind
120L/min
100°C~480°C
±1°C（static）
LED
≥100cm
200°C~480°C
±1°C（static）
<2mV
NO
<2ohm
LED
≥100cm
14