Samsung RL38SBIH Owner's Instructions Manual page 16

REVERSING THE DOOR SWING
7. Switch the direction of the
electric wire as below. Take
out the COVER WIRE HINGE
L from the underneath the
CAP CABI and rejoin it with
the electric wire.
9-2. When disassembling CAP
SPACE, do not Push
both side hooks but
bottom hook as shown.
12. Disassemble the Freezer
door by lifting it upward.
Be careful not to drop and
scratch the Freezer door.
8. With 11mm wrench,
separate the HINGE SHAFT
and then flip the HINGE and
reattach the HINGE SHAFT.
SHAFT
10. Switch the position of the
STOPPER DOOR and
the GROMMET HINGE as
shown.
STOPPER
GROMMET
13. Disassemble the COVER
LEG FRONT by removing
the 2 screws.
COVER LEG
FRONT
16
9-1. After rejoining the COVER
WIRE HINGE L and
the ASSY HINGE UPP,
Switch the position of the
GROMMET HINGE and the
CAP SPACE DOOR.
GROMMET HINGE
‑ DISASSEMBLY OF THE
FREEZER DOOR
11. Remove 2 bolts and screw
to disassemble the ASSY
HINGE MID.
14. Disassemble the ASSY
HINGE LOW as shown and
put the AUTO GUIDE upside
down, switch the position of
the SHAFT.
ASSY HINGE
LOW
When joining, tighten
a screw not to make
Note
unpredicted noise.
AUTO GUIDE