Samsung RL37SGPS Instruction Manual page 9

Control Panel (RL34EG*, RL34EC*,
7. Malfunction Alarm Function
8. Door Open Alarm function
8-1.In the Door Open Alarm function, if you open the door for a long period of time,
the refrigerator will give off DeeDee sound at intervals to Remind you of
closing the door.
First Power-on and Temperature Adjustment
When the appliance is connected with the power for the first time , all the displays will be on
for 2 seconds. The refrigerator temperature will be automatically set at 3
temperature will be set at -20 . The door opening alarm is on while the refrigerator and
freezer temperatures are displayed.
You may set the inside temperatures according to your actual requirements.
Control Panel (RL34SC*,RL34SG*,
The panel is on the upper frame.
Power
Colder
Power Button
8
RL37EG*, RL37EC*
normally and shows as
Vacation
Super Freeze
Alarm On
while the freezer
RL37SC*,RL37SG*
Temp.Control
Coldest
Temperature Setting Button
)
Control Panel (RL34SC*,RL34SG*,
1.Temperature Setting
1-1.Press Cooling Power button to set the temperatures;
1-2. Press the Cooling Power button and the refrigerator will flash to display the current
set temperatures. If you press the button again, the new temperature will be set.
There are five temperatures as options.
displayed according to some sequences when pressing the buttons.
lamps are on, the cooler the temperature will be;
1-3. The set value will be confirmed five seconds after stop pressing the button, the
currently selected temperature will be confirmed and be displayed.
If you need to freeze large amount of food stuff, set the temperature of freezer
compartment as the coldest temperature at least 24 hours before.
2.Power Button Power
During the operation of the refrigerator, if the button is pressed for 3
2-1.
seconds,all the lamps will be off and the refrigerator will stop running.
If the button is pressed for another 3 seconds, the refrigerator will start
2-2.
running again.
3.Malfunction Alarm Function
If the following problems occur, please notify the specialized staff to repair
3-1.
the refrigerator.
If the indicating lamp is flashing, it means the refrigerator has problem.
3-2.
Caution
If you want to clean the refrigerator,do pull out the power plug.
The First Power Connection and Temperature Adjustment
)
When the appliance is connected with the power, all displays will be on for 2
seconds, and then the refrigerator will enter the set operation mode
automatically. (3 lamps on)
The inside temperature is usually set under the default setting mode
(3 lamps on) or is adjusted according to the actual requirements of the user.
RL37SC*,RL37SG*
Temp.Control
The set temperatures will be circulation
Power Temp.Control
Colder Coldest
)
The more the
9