Samsung ML-4510ND User Manual page 253

Operating system problems
Refer to the Linux User's Guide that came with your computer for further information on Linux error messages.
4
Common PostScript problems
The following situations are PS language specific and may occur when several printer languages are used.
Problem
The PostScript file cannot
be printed.
Limit Check Error report
prints.
A PostScript error page
prints.
The optional tray is not
selected in the driver.
Possible cause
The PostScript driver may not be installed
correctly.
The print job was too complex.
The print job may not be PostScript.
The printer driver has not been
configured to recognize the optional tray.
• Install the PostScript driver (see "Software installation" on page 4).
• Print a configuration page and verify that the PS version is available
for printing.
• If the problem persists, contact a service representative.
You might need to reduce the complexity of the page or install more
memory.
Make sure that the print job is a PostScript job. Check to see whether
the software application expected a setup or PostScript header file to
be sent to the machine.
Open the PostScript driver properties, select the Device Options tab,
and set the tray option.
6. Troubleshooting
Solution
127