Admin Setup - Samsung ML-4510ND User Manual

Admin setup

Item
Password Sets the password to access the Admin Setup menu.
Protect
Select On to use this option and enter the password.
Change Changes the machine's password for accessing the
Password

Admin Setup.

Description
Item
• Clean Fuser: Cleans the fuser by printing a sheet.
The printed sheet has toner debris on it.
• CLR Empty Msg.: Prevents the TonerLow Alert
message from appearing on the display.
• Supplies Info.: Allows you to check how many
pages are printed and how much toner is left in the
cartridge.
• TonerLow Alert: If toner in the cartridge has run
out, a message informing the user to change the
toner cartridge appears. You can set the option for
this message to appear or not.
• Ram Disk: Enables/disables RAM disk to manage
jobs. Depending on the installed optional memory
Maintenance
size, you can set the RAM disk size to between 32
and 64 MB. This option does not appear if you have
installed mass storage device.
• Density Calibration: You can manually calibrate
the toner density of machine for the best possible
print quality.
• Density Sensing: Automatically calculates the
reduced or worn out supplies like toner or machine
parts and uses this information to adjust the
density.
• Density Control: The machine automatically
calibrates the toner density of machine for the best
possible print quality. If you select Off, the machine
is calibrated by the factory default toner density.
3. Useful setting menus
Description
68