Samsung ML-3750ND User Manual page 116

Installing driver over the network
To re-install it, use the command ". /install" to reinstall the binaries.
Setting up the printer
To add the printer to your UNIX system, run 'installprinter' from the
command line. This will bring up the Add Printer Wizard window.
Setup the printer in this window according to the following steps:
1
Type the name of the printer.
2
Select the appropriate printer model from the model list.
3
Enter any description corresponding to the type of the printer
in the Type field. This is optional.
4
Specify any printer description in the Description field. This is
optional.
5
Specify the printer location in the Location field.
6
Type the IP address or DNS name of the printer in the Device
textbox for network-connected printers. On IBM AIX with
jetdirect Queue type, only the DNS name is possible-numeric
IP address is not allowed.
2. Using a network-connected machine
7
Queue type shows the connection as lpd or jetdirect in the
corresponding list box. Additionally, usb type is available on
Sun Solaris OS.
8
Select Copies to set the number of copies.
9
Check the Collate option to receive copies already sorted.
10
Check the Reverse Order option to receive copies in the
reverse order.
11
Check the Make Default option to set this printer as default.
12
Click OK to add the printer.
21