Table of Contents
Advertisement
Quick Links
Installation and Operating Instructions
Bluetooth Connector S-BC
The Votronic Bluetooth Connector S-BC serving as an interface between the solar control, battery computer and phone or tablet. With the
associated app, the state of the on-board batteries and photovoltaic system can in mobile homes, caravans, boats, special and emergency
vehicles displayed on a smartphone, are graphically displayed and evaluated.
Please read these installation and operating instructions and safety completely before starting the connection and
commissioning.
Solar and battery information via a common communications module
•
Compact design and minimal power consumption
•
Easy installation (Plug & Play)
•
Easy to retrofit
•
Connection via Bluetooth 4.0
•
Range up to 50 m outdoors
•
Free Votronic Energy Monitor App (Android and iOS)
Free Votronic Energy Monitor App (Android and iOS)
Free Votronic Energy Monitor App (Android and iOS)
•
the required Votronic Energy Monitor App for Android or iOS is available for free from the Google Play Store or iOS
the required Votronic Energy Monitor App for Android or iOS is available for free from the Google Play Store or iOS
the required Votronic Energy Monitor App for Android or iOS is available for free from the Google Play Store or iOS
App Store.
Bluetooth Connector S-BC
Made in Germany
2
http://energymonitor.votronic.de
1
1
2
Key
- 1 -
No. 1430
Advertisement
Table of Contents
Related Manuals for Votronic S-BC
Summary of Contents for Votronic S-BC
- Page 1 No. 1430 The Votronic Bluetooth Connector S-BC serving as an interface between the solar control, battery computer and phone or tablet. With the associated app, the state of the on-board batteries and photovoltaic system can in mobile homes, caravans, boats, special and emergency vehicles displayed on a smartphone, are graphically displayed and evaluated.
- Page 2 LCD battery computer S VPC or Jupiter. In the case of the solar controller, the display unit is optional and not mandatory for the operation of Bluetooth Connectors S-BC. If only one Votronic device to the Bluetooth Connector S-BC be connected, so this always terminals (right) to the first is connected.
- Page 3 The following are possible connection combinations with the Bluetooth Connector S-BC are listed below: - 3 -...
- Page 4 - 4 -...
- Page 5 For safety reasons, a smartphone / tablet must match the Votronic Energy Monitor be coupled to the Bluetooth Connector S-BC app first (bonding), to access the data. Only after the live data and the recorded data (log data) are retrieved as diagrams and displayed. Other devices that are not connected, do not have access to the data. There can be up to ten devices with the Bluetooth Connector S-BC coupled.
- Page 6 The Bluetooth Connector S-BC has been designed according to the valid safety regulations. The Votronic Bluetooth Connector S-BC serving as an interface between the solar control, battery computer and phone or tablet. With the associated app, the state of the on-board batteries and photovoltaic system can in mobile homes, caravans, boats, special and emergency vehicles displayed on a smartphone, are graphically displayed and evaluated.
- Page 7 notes - 7 -...
- Page 8 Make sure that Bluetooth is activated on the phone / tablet. Make sure the Bluetooth Connector S-BC to connect to the solar controller and / or smart shunt, has by watching the LEDs on the device. These must flash at least every 5 seconds, thus signaling the reception of data.
Need help?
Do you have a question about the S-BC and is the answer not in the manual?
Questions and answers