Table of Contents
Advertisement
There is no image on the
screen.
Is the power indicator on
the monitor blinking at 1
second intervals?
I cannot see the
Have you locked the On
On Screen
Screen Display (OSD)
Display.
Menu to prevent changes?
The screen
Is the screen displaying
shows strange
only one color as if looking
colors or just
at the screen through a
black and white.
cellophane paper?
Have the screen colors
become strange after
running a program or due
to a crash between
applications?
Has the video card been
set properly?
The screen
Have you changed the
suddenly has
video card or the driver?
become
Have you adjusted the
unbalanced.
resolution or frequency to
the monitor?
The screen can be unbalanced due to the cycle of the video card signals.
Readjust Position by referring to the OSD.
The screen is
Have you adjusted the
out of focus or
resolution or frequency on
OSD cannot be
the monitor?
adjusted.
LED is blinking
Is the frequency properly
but no images
adjusted when checking
on the screen.
the Display Timing on the
menu?
There are only
Have the Windows colors
16 colors shown
been set properly?
on the screen.
The screen
colors have
changed after
Has the video card been
changing the
set properly?
video card.
There is a
Have you installed the
message that
monitor driver?
reads
"Unrecognized
See the video card manual
monitor, Plug &
to see if the Plug & Play
Play (VESA
(VESA DDC) function can
DDC) monitor
be supported.
found".
Check when
MagicTune™ feature is
MagicTune™
found only on PC (VGA)
disappears.
Please change to the recommended
mode during this one-minute period.
(The message is displayed again if
the system is rebooted.)
The monitor is in PowerSaver mode.
press a key on the keyboard to
activate the monitor and restore the
image on the screen.
Unlock the OSD by pressing the
MENU button for at least 5 seconds.
Check the signal cable
connection.Make sure the video
card is fully inserted in it's slot.
Reboot the computer.
Set the video card by referring to the
video card manual.
Adjust screen image position and
size using the OSD.
Adjust the resolution and frequency
at the video card.
(Refer to the
Preset Timing
Adjust the resolution and frequency
of the video card.
(Refer to the
Preset Timing
Adjust the frequency properly by
referring to the video card manual
and the
Preset Timing
Modes.
(The maximum frequency per
resolution may differ from product to
product.)
Windows ME/2000/XP:
Set the colors properly at the
Control Panel → Display →
Settings .
Set the video card by referring to the
video card manual.
Install the monitor driver according
to the
Driver Installation
Install the monitor driver according
to the
Driver Installation
* To check whether your PC is
available for MagicTune™ feature,
Modes).
Modes).
Instructions.
Instructions.
Advertisement
Table of Contents
