Accessories - iRobot Roomba 600 Series Owner's Manual

Accessories

The Dual Mode Virtual Wall Barrier
(optional accessory for all models)
EN
The Dual Mode Virtual Wall barrier keeps
Roomba in the places you want to be
cleaned — and out of the ones you don't.
In between cleaning cycles, you can leave
the device operating in its position on the
floor. You can set your device to one of two
modes to fit your home's cleaning needs:
Note: Under normal use, batteries will last 8-10 months. If you are not planning
on using your Virtual Wall device for an extended period of time and you would
like to store it, be sure to switch it to the "Off " (middle) position.
Virtual Wall Mode: When the switch is in the "up" position (
as a Virtual Wall. This means that you can set it to block openings of up to 10 feet
(3 meters). It creates an invisible, cone-shaped barrier that only Roomba can see.
Note: This barrier gets wider as it gets further from the device (refer to illustration).
4 For more information, visit www.irobot.com/Roomba600
), the device functions
Halo Mode: When the switch is in the "down" position (
creates a protective zone that Roomba will not enter. This prevents
Roomba from bumping into items you want to protect (e.g. a dog
bowl or vase) or crossing into undesired areas (e.g. a corner or under
a desk). The Halo is invisible and reaches approximately 24 inches (60
centimeters) from the center of the device.
), the device