Advertisement
7
Attaching the Middle Snowman and Support Pole
Insert the connecting rods at the bottom of Middle Snowman's Feet
(H) into the connecting holes at the top of Gift Box (J). Insert another
section of the Support Pole (P) through the top of Middle Snowman's
Hat through the connecting loop by the Leg then lock into the top of
the bottom Support Pole.
J
9 Attach the Hat , Left Arm and Legs to the Upper Snowman's
Body
Insert the connecting rods on Hat (A) and Left Arm (B) into the connecting
holes on the Head/Body (C). Insert the connecting rods on each Leg (D)
into the connecting holes at the bottom of the Upper Snowman's Body (C)
and fasten together at the connecting loops with Plastic Ties (S).
C
S
D
11 Assembling the Scarf
Wrap the Scarfs (Q) around the neck of each Snowman.
Notes: Scarfts can be used for your desired look.
Q
P
H
A
B
ASSEMBLY
8
Assembling the Nose and Body of Upper Snowman
Insert the connecting rods on the Nose (E) into the connecting holes on
the Head (C). Align the two Halves of Upper Body (C) with each other
then insert the connecting rods on one half into the connecting holes on
the other half and fasten together at the connecting loops with Plastic
Ties (S).
E
10 Attaching the Upper Snowman to the Middle Snowman
Insert the top of the Support Pole (on the top of the Middle Snowman's
Head) into the connecting hole at the bottom of Upper Snowman's Body
and secure with the built in locking pin.
12 Assembling the Ground Stakes
Insert the hooked end of each Ground Stake (R) over the metal frame
Base Stand at four corners then firmly into the ground.
S
C
R
Advertisement
