Changing The Picture Standard; Adjusting The Picture Settings - Samsung SyncMaster 241MP Owner's Instructions Manual

Changing the Picture Standard

Picture
à ¨
Mode Custom
Brightness
Contrast
Sharpness
Color
Tint
à ¨
Size Wide
Power
SOURCE AUTO DISPLAY STILL
P.STD S.STD
P
MUTE EXIT
-/-- PRE-CH

Adjusting the Picture Settings

TTX/MIX V.DOLBY
HOLD DUAL I/II LIST/FLOF CANCEL
SLEEP SUBPAGE SIZE PIP
ON
Picture
P.SIZE PBP LOCATE
à ¨
Mode Custom
Brightness
Contrast
Sharpness
Color
Tint
à ¨
Size Wide
Brightness
70
English-22
You can select the type of picture which best corresponds to your
viewing requirements.
1
Press the MENU button.
Result: The main menu is displayed.
2
Press the PM or PL button to select the Picture.
Result: The options available in the Picture group are displayed.
3
Press the - or
Result: The Mode is selected.
4
Select the required picture effect by pressing the
button repeatedly. The following picture effects are available:
Custom - Standard - Natural - Mild.
➣
You can also set these options simply by pressing the P.STD
(Picture Standard) button.
➣
On the Picture menu, if you change the Brightness, Contrast,
Sharpness, Color or Tint (NTSC only) settings, the Custom is
selected automatically.
Your set has several settings which allow you to control picture
quality.
1
Press the MENU button.
Result: The main menu is displayed.
2
Press the PM or PL button to select the Picture.
Result: The options available in the Picture group are displayed.
3
Press the - or
4
Select the option (Brightness, Contrast, Sharpness, Color or
Tint-NTSC only) to be adjusted by pressing the PM or PL button.
Press the - or
Result: The horizontal bar is displayed.
5
Press the - or
➣
If you make any changes to these settings, the picture standard is
automatically switched to Custom.
+ button.
+ button.
+ button.
+ button to reach the required setting.
- or +