Setting Up /Assembly - Blitz Master Gear 1.0 Operating Instructions Manual

Operating Instruction
Taking into use
3. Taking into use
For technical details see dimension sheet in
appendix.
3.1 Setting up / Assembly
Caution
Wear protective gloves when assem-
bling the spring.
Put the wheel brake on.
Assemble the handle and spring using
the drawing as a guide. Please use the
en-closed cable binder in accordance
with Fig. 5.
Both ends of the shaft swivel points are
to be provided with the enclosed cover
caps.
Fig. 4:
Fig. 5:
Assemble the components in the enclosed
packet using the drawing as a guide.
Exchange the tank plug for the orange
breather plug.
Fig. 6:
The component packet contains:
• Pos. 1 - Foot pedal
• Pos. 2 - Hex bolt
• Pos. 3 - Hex nut
• Pos. 4 - Bush
• Pos. 5 - Spring dia ø 15x87
• Pos. 6 – Breather plug R 3/8"
Handle
Spring
Fig.7:
Fig.8:
Have you read the operating instruc-
tions and above all the safety points
and above all understood them? Then
you can take the machine into use.
31