ZyAura ZG906CMONP Operating Instructions

Handheld Multi Gas Detector Operating Instructions
Model: ZG906CMONP
Product Overview
Thank you for selecting ZG906CMONP handheld multi gas detector. The ZG906CMONP is designed to
simultaneously measure multiple gas concentrations in the ambient environment. With long-term data storage,
the user can assess the environmental friendliness. When ZG906CMONP measures the gas concentration
reaching the alarm setting or higher, the data display and alarm functions are activated. ZG906CMONP is
equipped with an RS485 interface for connecting to a computer for remote monitoring so as to reduce the risk
of exposure to high concentrations of harmful gases and avoid harm to human health. ZG906CMONP can be
used in a wide range of industries, which include paint-related industries, wineries, related industries of CO2,
food industry, laboratory, construction industry, etc.
Features:
□ V 刈 Dual beam NDIR (Non-Dispersive-Infrared) technology is used to measure CO
A E A
improve the long term stability.
□ V Measurement items:
A E A
Basic: CO , CO, PM2.5, PM10, RH, DP, AMB, Barometer
2
Optional: O , NH3
2
□ V Large LCD for easy reading of gas concentration and temperature and humidity.
A E A
□ V 刈 Audible alarm
A E A
□ V 刈 Data logging with SD card
A E A
□ V Through the RS485 interface connection, multiple ZG906CMONP units can be connected to the back-end
A E A
computer system as a security monitoring application.刈
□ V Built in the LCD backlight for easy reading in the dark.刈
A E A
□ V This device is supplied with Li- ion 18650 3.7V rechargeable batteries, can be used for a long time.
A E A
A. Power Key B. Humidity Sensor C. Temperature Sensor
E. Charge Lamp F. M1 (Zone 1 Mode Key) G. UP\TWA\STEL\Max\Min
I. Enter J. DOWN\ALTI K. Log (Data Logger)
M. SD Card Slot N. RS485 Jack O. Battery Cover
Q. Screw Position R. Tripod Screw
Key description:
Zone 1 sensor selection (CO , CO, O , AMB)
此
M1 ( )
F 2 2
A E A
Zone 2 sensor selection (CO , CO, O , NH3, RH, DP, AMB, PM2.5, PM10)
此
M2 ( )
H 2 2
E
A A
TWA (CO , 8-hr time weighted average), STEL (CO
汝 ( 此 )
日
2
E
A A
ALTI (Atmospheric pressure)
汍 ( 此
木 )
A E A
Execute a command or select options.
此
Enter ( )
I
E
A A
Data logger
Log ( 此 )
K
A E A
LCD display symbol description:
Symbol Description
CO concentration, parts per million (ppm)
2
CO concentration, parts per million (ppm)
PM2.5 dust concentration (µg/m
3)
@
concentration and
2
(Display Features and Modes)
Operation Instructions
Power on:
D. LCD
Switch the Power Key (
H. M2 (Zone 2 Mode Key)
Measurement:
L. USB Socket
After power on, the device starts to measure and update the data every second.
P. Stand
Press the "M1" key (
A
Press the "M2" key (
A
(CO
àCOàO àNH3àRHàDPàAMBàPM2.5àPM10)
2 2
Backlight:
The backlight appears on the screen during startup and operation. After the device is idle for 30 seconds, the
backlight is automatically turned off to extend battery life.
, 15 min. weighted average), MAX, MIN
2
Display all sensor readings
Press the "M2" key (
A
of all sensors sequentially in time intervals. If you need to increase the display interval time, long press the
"M2" key ( ).The interval time will automatically increase (1+0.5+0.5..... max. 10 seconds) , and release
此
H
A E A
the "M2" key ( ), the readings will be displayed according to the last set interval. If press the "M2" key (
此 H
A E A
Basic此刈 Optional氖 again for more than 3 seconds, the
此
此
此
Real-time setting:
Long press the "M1" key (
"▲( )/▼( )" key to edit the parameters, and press the "Enter" key (
此 G 此 J
A E A A E A
PM10 dust concentration (µg/m 3)
O concentration (%)
2
NH3 concentration ppm (parts per million)
Battery capacity
Atmospheric pressure
Time weighted average (8 hours)
Short＃ Term Exposure Limit
(15 min. weighted average)
Maximum value
Minimum value
Ambient temperature
Relative humidity
Dew point
Real-time setting display
Year display
High/low gas concentration calibration
High/low gas concentration alarm
Display cycle
SD card
) on.
此
A
A E A
) to switch the Zone 1 sensor display. (CO
此 F àCOàO àAMB)
2 2
E
A
) o switch the Zone 2 sensor display.
此 H
E
A
) for more than 3 seconds and the screen displays . Zone 2 displays readings
此 H
E A
function can be cancelled.
) to proceed the date and time setting. The default format is 24-hour. Press the
此 F
A E A
) to proceed the next setting. The
此 I
A E A
setting sequence is: yearàmonthàdateàhouràminute. After finishing the real-time setting, press the "M1"
氖
key ( ) to continue the alarm setting.
此 F
A E A
氖
氖
此
Alarm settings:
The setting order of the sensors is CO
àCOàO
2
此
high/low gas concentration alarm setting. Press "▲(
the "M1" key ( ) to proceed the next sensor alarm value settings. After settings, press and hold the "M1" key
此 此 F
A E A
( ) to return to the main screen.
此 F
A E A
此
此
此
此
Sensor warm-up time and logging Interval:
此
No. Sensor Warm-up time
After powering on and standby time,
此
data logging can be operated.
自1 minute
1 CO After power on 5 minutes
此 2
2 CO 5 minutes After power on 5 minutes
此
自1 minute
3 O After power on 5 minutes
2
4 NH3 5 minutes After power on 5 minutes
此 PM2.5
自1 minute
5 After power on 5 minutes
PM10
此
Data logging:
Press the "Log" key ( ) for 3 seconds and the screen displays
此 此
K
A E A
long press the "Log" key ( ),this function can be canceled. When
此 K
A E A
此
broken or full; when remains stationary, it indicates normal operation.
Data logging interval time setting:
The default interval time is 00:02 (2 seconds). Press the "Log" key (
the interval time will automatically increase. The interval time, loop display, ranges from 00:02 seconds to
60:00 minutes and then back to 00:02 seconds. The interval time
controlled by the "Enter" key ( ); the interval time is
此 I
A E A
) °C/°F switch:
此 H
A E A
When the temperature is displayed on the screen, press the "▲" key (
Atmospheric pressure display:
Press "▼" key ( ), and then press "▲" key (
此 J
A E A
(mmHg). The display returns to the main screen after 10 seconds.
Atmospheric pressure compensation:
Press and hold the "▼" key ( ) to turn the compensation function on/off. The gas compensation is only for
此 J
A E A
CO and O .
2 2
àHN3àPM2.5. Press the "Enter" key ( ) to switch the
此 I
2
A E A
)/▼( )" key to edit the parameters, and then press
此 G 此 J
A E A A E A
Data logging interval time setting
Data logging interval
time setting
2 seconds~60 minutes
2 seconds~60 minutes
2 seconds~60 minutes
2 seconds~60 minutes
2 seconds~60 minutes
to start the data logging function. If
flashes, it means that the SD card is
) for more than 3 seconds and then
此 K
A E A
ff switch is
舌尤 刈 仙 他 仞 出 凹 以 冬 及 刈 凹 仕 以 刈 乍 出 包
舛尤 刈 仙 他 仞 出 凹 以 冬 及 刈 凹 仕 以 刈 乍 出 包 包 以 冊 刈 他 冬 刈 充 付 付 壬
) to switch °C/°F.
此 G
A E A
) to select Altitude (M) à Altitude (ft) à Barometer
此 G
A E A