1.2.2 PC-end to Device-end
Device Connection
Enable microphone input on the PC. T T hen connect a speaker to the audio output port of th he device. Log in to
the web viewer's live view page and t t hen click the microphone button on the top right corn n er to enable the
bidirectional audio function.
1.3 Alarm Setup
To set up the Alarm input and output t , do the following:
1. Connect the alarm input device t to t he alarm input port.
2. Connect the alarm output device e to the alarm output port. Alarm output port can only y be connected to a
"N/O" alarm device.
3. Open the web setup page, and then configure the alarm input and output in the Ala a rm section. Alarm
input in the web settings corresp ponds to the Alarm input on the I/O port.
4. Set the alarm output in the web b settings. The alarm output corresponds to the alarm m output on the I/O
port.
Figure 1-5 Alarm setup screen
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
4